Şimdi Ara

Epox rda+ Yeni Bios 3827

Daha Fazla
Bu Konudaki Kullanıcılar: Daha Az
2 Misafir - 2 Masaüstü
5 sn
10
Cevap
0
Favori
333
Tıklama
Daha Fazla
İstatistik
  • Konu İstatistikleri Yükleniyor
0 oy
Öne Çıkar
Sayfa: 1
Giriş
Mesaj
  • http://www.epox.org/bios/8rda/8rda.zip



    Model: EP-8KRA2+
    BIOS: KRA23828.BIN (A100)
    Date: 08/28/2003
    Fixed:
    1) Add to show AppleBred CPU information at screen.
    2) Add "Power_On by on Board LAN" control in menu item.
    3) Patch some RAMs hang at POST 29H when Load Fail-Safe Default in the BIOS Setup.
    4) Enhance the function of pressing Insert key to safe boot, set memory timing by SPD.
    6) Always enable VT6420 device if the CMOS checksum error.
    7) Fixed install SATA driver on Windows ME, blue screen after reset.

    Model: EP-8RDA3+
    BIOS: 8RD33827.BIN (1300)
    Date: 08/27/2003
    Fixed:
    1) Add "Auto_Precharge_Selectable" option to patch some DDR unstable issue. (i.e. A-DATA DDR400 / TwinMOS DDR 400)
    2) Add support MagicScreen utility function.
    3) Reduce code size for aggressive ROMSIP table. Enabled CPU Interface item.
    4) Remove Reset Configuration Data item, because the BIOS doesn’t support ESCD.
    5) Added to show AppleBred CPU information at screen.
    6) Solved CPU warning temperature/Shutdown temperature function fail.
    7) Show help message for VDD Voltage Regulator item.
    8) Remove some items:
    -OS Select For DRAM > 64MB
    -Typematic Rate Setting
    -Typematic Rate (Chars/Sec)
    -Typematic Delay (Msec)

    Model: EP-8RDA3G
    BIOS: 8RD33827.BIN (1300)
    Date: 08/27/2003
    Fixed:
    1) Add "Auto_Precharge_Selectable" option to patch some DDR unstable issue. (i.e. A-DATA DDR400 / TwinMOS DDR 400)
    2) Add support MagicScreen utility function.
    3) Reduce code size for aggressive ROMSIP table. Enabled CPU Interface item.
    4) Remove Reset Configuration Data item, because the BIOS doesn’t support ESCD.
    5) Added to show AppleBred CPU information at screen.
    6) Solved CPU warning temperature/Shutdown temperature function fail.
    7) Show help message for VDD Voltage Regulator item.
    8) Remove some items:
    -OS Select For DRAM > 64MB
    -Typematic Rate Setting
    -Typematic Rate (Chars/Sec)
    -Typematic Delay (Msec)

    Model: EP-8RDA
    BIOS: 8RD13827.BIN (4700)
    Date: 08/27/2003
    Fixed:
    1) Add "Auto_Precharge_Selectable" option to patch some DDR unstable issue. (i.e. A-DATA DDR400 / TwinMOS DDR 400)
    2) Add support MagicScreen utility function.
    3) Reduce code size for aggressive ROMSIP table. Enabled CPU Interface item.
    4) Solved CPU warning temperature/Shutdown temperature function fail.
    5) Show help message for VDD Voltage Regulator item.
    6) Update awdflash.exe utility version of 8.23F to 8.24V.
    7) Remove some items:
    -OS Select For DRAM > 64MB
    -Typematic Rate Setting
    -Typematic Rate (Chars/Sec)
    -Typematic Delay (Msec)

    Model: EP-8RDA+
    BIOS: 8RDA3827.BIN (5700)
    Date: 08/27/2003
    Fixed:
    1) Add "Auto_Precharge_Selectable" option to patch some DDR unstable issue. (i.e. A-DATA DDR400 / TwinMOS DDR 400)
    2) Add support MagicScreen utility function.
    3) Reduce code size for aggressive ROMSIP table. Enabled CPU Interface item.
    4) Solved CPU warning temperature/Shutdown temperature function fail.
    5) Show help message for VDD Voltage Regulator item.
    6) Update awdflash.exe utility version of 8.23F to 8.24V.
    7) Remove some items:
    -OS Select For DRAM > 64MB
    -Typematic Rate Setting
    -Typematic Rate (Chars/Sec)
    -Typematic Delay (Msec)







  • Teşekürler haber için,

    Bişey dikkatimi çekti;

    1) Add "Auto_Precharge_Selectable" option to patch some DDR unstable issue. (i.e. A-DATA DDR400 / TwinMOS DDR 400)

    Rda+ nın Twinmos ddr400 ile sorunu mu var? Twinmos ddr400 almayı düşünüyodum tam da. Bu yeni seçenek sorunu ortadan kaldırma pahasına performansı düşürüyor mudur acaba?
  • Bende Twinmos var, Dual'da bırak 400'ü, 460'ta bile sorun yok. Bazen olabiliyormuş böyle stabilite sorunları demekki. Zaten o stabilite sorunlarına karşı epoxtr sitesinde "RAM'lerin hızını BySPD yapın" diyor.
  • [Deleted by Admins]
  • bana kalırsa yarar var update etmende....ben daha yapamadım vakit yok...ama en kısa zamanda deneyecegim...bence yukle...
  • bu epox da bios yenilenince sistemi baştan kurmak gerekebiliyor o yüzden yedeklerinizi alın öyle update yapın
  • ben update ettim

    hiç sorun çıkmadı, hatta oc değerlerimde yükselme oldu
  • ben bir fark göremedim...yükleyip deneyenlerde ne gibi farklar var?
  • Ben de bir fark görmedim.
  • 
Sayfa: 1
- x
Bildirim
mesajınız kopyalandı (ctrl+v) yapıştırmak istediğiniz yere yapıştırabilirsiniz.