Şimdi Ara

Nvme ssd Adaptörle bu Anakartlarda çalışır mı ?

Daha Fazla
Bu Konudaki Kullanıcılar: Daha Az
1 Misafir - 1 Masaüstü
5 sn
4
Cevap
0
Favori
123
Tıklama
Daha Fazla
İstatistik
  • Konu İstatistikleri Yükleniyor
0 oy
Öne Çıkar
Sayfa: 1
Giriş
Mesaj
  • Elimde asus z77 maximus v extreme ve z87 sabertooth var. Anakart üzerinde direk m2 sata çıkışı yok fakat pcie üzerinden adaptör ile bağlamayı düşünüyorum. Çalışır mı ?

    < Bu ileti mobil sürüm kullanılarak atıldı >



  • Z87ye NVMe bios mod var diye biliyorum win-raid'e göz atın.

    < Bu ileti mini sürüm kullanılarak atıldı >
  • İşinizi kolaylaştırdım



    https://www.win-raid.com/t871f50-Guide-How-to-get-full-NVMe-support-for-all-Systems-with-an-AMI-UEFI-BIOS-23.html



    quote:

    Signed up to say thanks for the work; glad I stumbled onto it. I was able to boot into Windows 10 on a Samsung 950 Pro 512GB using an ASUS Sabertooth Z87 after modifying the BIOS (even though I know nothing about this). CrystalDiskMark shows the speeds I would expect from this drive.

    Procedure:

    1. Downloaded the latest Sabertooth Z87 BIOS (2103).

    2. Downloaded MMTool.

    3. Inserted the 3 ASUS Z97 modules downloaded from the link in the OP at Index 03 (saw this in a Z97 board BIOS).

    4. Flashed to the modified BIOS using USB Flashback

    5. Disconnected all SATA drives, turned on the computer, and saw the 950 Pro now listed as a boot device.

    6. Disabled Hardware Fast Boot and Fast Boot (unable to boot with these enabled).

    7. Installed Windows 10 onto the 950 Pro via another USB drive. [I was originally planning to upgrade to Windows 10 on this drive, so I hadn't installed it yet.]



    Some notes:

    1. My BIOS splash screen is now gone, so I don't see the TUF logo anymore, but it still says to press Delete or F2 to enter the BIOS. This screen pops up twice, first for around 3 seconds, and again for around 2 seconds.

    2. After the splash screen, the AMI screen always pops up saying the BIOS has invalid system information and to update the BIOS to resolve this (pressing F1 skips it).

    3. The Windows 10 boot logo appears briefly (1-2 seconds), disappears, and then reappears and boots fully into Windows without issues.

    < Bu ileti mini sürüm kullanılarak atıldı >




  • 
Sayfa: 1
- x
Bildirim
mesajınız kopyalandı (ctrl+v) yapıştırmak istediğiniz yere yapıştırabilirsiniz.